HT-adj width


Patented Masking Tape Dispenser

Jobber Discounts start at Quantity 5

Current Customers, Upload a short video and receive 40% off your next EZEdger.

Adjusting Fold Width

The folded portion of EZ Edged tape can be varied from about 4mm to 7mm width depending on the application requirement.

VIDEO (requires Shockwave/Flash Player.)

Video is also available on Vimeo at EZ Edger Fold width adjustment.


The width of EZ Edger fold can be adjusted using the dial setting from 4 to 7mm. (Use the 'R' side for right-hand operation.)		Setting of 4-5 provides enough fold width for normal operation.

However, if you need wider fold, then just adjust the dial up to 7.		Here, you can see the difference between two widths. The bottom one is with '4' setting and the top is with '7'.

For left-hand operation, use the 'L' side of the dial. To switch from 'R' to 'L', lift both rollers first...		...adjust to the 'L' side setting and then pull about 6" of tape. ( With both rollers up, normal unfolded tape will be dispensed.)

Lower the 'F' roller first. Pull about 6" of tape. Then lower the 'B' roller.		With both rollers lowered, now the tape will be folded on the left side.

Example of left side fold.		Normally, one would not switch between left-handed and right-handed operation. But, to do so, lift both rollers first and then make the switch.